[Tutorial Avançado] Criação de produto e rótulo costumizados

Introduction
It should be noted that this is an advanced tutorial and I’ll be writing to that level. If you’re still getting your feet wet in Photoshop, you may just want to sit back, kick your feet up and watch the progression of the project because this lesson will move rather quickly and won’t have as much detailed instruction as you’re used to.

Step 1
For the purpose of this tutorial I’ll be working with a document that’s 540px wide at 72ppi. Obviously if you were working toward a print quality file, you’d want to be 150-300ppi depending on your printer’s desired file size.

I’m going to start by placing a vector file I found at iStockPhoto onto the stage and sizing it accordingly. Although I could have created the container from scratch, the small cost of a stock piece like this far outweighs the time it would have taken to create by hand. I’ve rasterized the vector because it’s a Rights Managed file and I can’t go giving it away. If you want to pick this one up at iStock it’s file ID is #5343602. In this case I was only worried about getting a container that would suit my style and labeling purposes and not so much about color.


Step 2
The bottom of this container was a bit bright for my tastes, so I solved the problem on a new layer with a Black to Transparent Linear Gradient from the bottom of the container upward about 1/3 of the way. I then created a Clipping Mask between the Bottom Gradient and Bottle layers. I also changed the Bottom Gradient layer’s Blend Mode to Luminosity and lowered it’s Fill to around 75%.


Step 3
We’ll now add a few Adjustment Layers, one for Curves and one for Levels, above the Bottom Gradient layer also clipped to the Bottle layer as shown below. I want to deal with the cap separately, so I’m also going to add Layer Masks to these two adjustment layers so that they’re only visible over the body of the bottle.

(*note: Once you’ve created the Layer Mask on one of the Adjustment Layers, you can easily copy it to the other Adjustment Layer by holding down the Option (PC: Alt) key and dragging the mask from one layer to the other.)



Step 4
The last thing to do on the body of the bottle is to shift it’s color. To do this, create a new layer above the last Adjustment Layer called Color Change and fill the entire layer with a new color. I took a color from the design of the brochure #d8d6cc. Clip this layer to the others, add the same Layer Mask as the Adjustment Layers have (ie. just the body of the bottle) and change it’s Blend Mode to Color.


Step 5
Now all we need to do is get the cap to look like it belongs. To do this I’m going to add a new Hue/Saturation adjustment layer at the top of the stack and simply drag the Saturation slider all the way to the left. I’ll also clip this layer to the others and I’ll black out everything except the cap in the Layer Mask.


Step 6
To keep our file clean and easy to manage, lets select the Bottle layer along with all the layers that area clipped to it and press Command-G (PC: Ctrl-G) to Group the layers. I’ll rename the group Bottle Group.

(*note: If you’re using and older version of Photoshop, this option may not be available to you. Perhaps it’s time to upgrade!)


Step 7
Now lets grab the Pen tool by pressing the P key and create a Path to define where the label will live on our bottle. I tried to use the natural curves along the edges and bottom to help give my label a shape that would feel right.

(*note: As a reminder on good Photoshop habits, don’t forget to switch over to the Paths palette and rename your path so it’ll be saved incase you need it later!)


Step 8
Instead of using this new path as a mask for a single layer, we’re going to use it as a mask for an entire group… but since you can’t have a group without a starting layer, lets create a new layer called White Background and fill the layer with white, then with the new layer selected press Command-G (PC: Ctrl-G) to put it into it’s own group. Rename the group Label, select it and then with the Pen tool still active, Control-Click (PC: Right-Click) on the path and select Convert to Vector Mask. No anything we put inside this Group will use the same mask and we won’t have to mess with a bunch of Clipping Masks and Layer Masks as we work on the label elements. We’ll need plenty of those to achieve other effects anyway, so it’s one less thing to have to worry about.

(*note: If you’d prefer not to have the path lines visible, simply Option-Click (PC: Alt-Click) on the Vector Mask thumbnail next to the Group thumbnail.)


Step 9
The first thing I’m going to do is create a dark space at the bottom of my label. Most of this will be covered up as we continue to add layers and elements, so think of it as the first layer of paint on a canvas. It doesn’t have to be exact, and it may change later, but it’s our starting point. I used the Elliptical Marquee tool to create a large oval which I filled with a dark brown #493a2f and placed in the lower left side of the label.


Step 10
Next, a Foreground to Transparent Linear Gradient from the bottom to the top of the label… on it’s own layer of course.


Step 11
I wanted some bubbles for the bottom of the bottle, so I did a Google Images search for the term Bubbles and came up with this one from a foreign cleaning ad. I first desaturated the image by pressing Command-Shift-U (PC: Ctrl-Shift-U) used levels to increase the contrast of the blacks and then inverted the image by pressing Command-I (PC: Ctrl-I).


Step 12
Once the bubbles had been prepared and inverted I drug them into my file above the Brown Linear Gradient layer and named the layer that was created Bubbles. Then all I had to do was change the layer blend mode to Screen and Shazam!


Step 13
Now lets add the main text to the bottle. Since folks seem to think it’s ok to steal my tutorials, I like to include my name in the projects when possible… I’m sure you hadn’t noticed. I used the Arch Warped Text feature in the Character Options bar to add a little character to the word Hero and the word "the" is on it’s own layer so I could keep that text straight.


Step 14
Now lets add a double border to the text. Create a new layer below the text layers called Text Borders and make both layers of text into a selection by holding down the Command and Shift keys while clicking on both the text layer’s thumbnails. Expand the selection by choosing Select>Modify>Expand from the main menu and setting the Expand amount to 5px. Using the color picker, find a nice tan color like #bebaaa and fill the selection with color.


Step 15
Now lets add a few Layer Styles to the Text Borders layer. A 5px stroke will add the second dimension to our border, the little bevel will make the first border stand out a little and a drop shadow will polish off the effect.


Step 16
Behind the Text Borders layer we’ll now add a couple of 12 point stars, one larger than the other by using the Custom Shape tool set to Shape Layer, Polygonal, and then using the Polygon Options fly out menu to set a deep indent to the sides and specifying that we want it to be a star. After creating the first star Shape Layer, I duplicated it and used Free Transform on the path to make the second one smaller.

I gave the Little Star layer an Opacity of 50% and the Big Star layer an Opacity of 25%.

(*note: Holding down the Option and Shift keys while transforming will constrain the proportions and transform from the center of the object.)


Step 17
To add a little more brightness and glow behind the text, lets add one more layer, this time below the Star layers called White Radial Gradient. Press the G key to switch to the Gradient tool, make sure your foreground color is set to white and that the tool is set to Foreground to Transparent and Radial then drag a radial gradient from the middle of your text outward to the edge of the label. I also dropped the opacity of this new layer to 85% to tone down the effect a touch.


Step 18
Every good cleaning product needs a tagline of some sort, so lets add the text for that now. Again I’ll use the Arch style to make the tagline flow with the text above it. I placed this text layer just above my Star layers.


Step 19
It’s obvious we’ll need some sort of dark shape behind the taglilne if we want it to stand out, so lets create a new layer behind the tagline and using the Pen tool lets draw a nice little swoosh type shape. Convert the path to a Vector Mask as we did earlier and fill the layer with the original dark brown color used for the circle in Step 9 (#493a2f). I’ll name this layer Swoosh.


Step 20
Lets add a few Layer Styles to the Swoosh layer as well. I’ll use a small Stroke with a low opacity to create a neat edge effect, and a Drop Shadow for depth.

The tagline looks a little too stark against the dark background so lets drop it’s Fill to around 65% as well.


Step 21
Lets add one more thing before we move on. I really think a border around the whole label might set it apart from the body of the bottle better. I want the main lettering to appear on top of the border though, so lets add a new layer above the Swoosh layer called Label Border and for the moment lets fill it with white.

Drop the new layer’s Fill opacity down to 0% (which will momentarily make it invisible) and lets use the Vector Mask from this Group on the layer as well. Hold down the Option (PC: Alt) key and click and drag the Vector Mask from the Label Group onto the new Label Border layer. Once the mask is in place, add the following layer styles.

A few things to pay attention to here:
The Bevel and Emboss size is set to 0px, but when you combine that with the Chisel Hard setting you actually get what looks like a 1px hard bevel which is perfect for the edge of a piece of paper (or a label). And second, notice that the Stroke location is set to Inside. The color for the Inner Glow is #493a2f and for the Stroke is #beb9aa.


Step 22
We’re now done with the label, but I think the bottle needs something more, perhaps in the upper left corner of the label. How bout one of those stickers they’re always putting on stuff… yeah, that’s it!

Create a new layer above the Label group called Sticker Background, change your foreground color to that nice dark brown #493a2f and grab the Custom Shape tool again. Making sure that Shape Layer and Polygon Tool are set correctly, change the number of sides to 30 and the options to Star with a 20% indent and click and drag your sticker shape onto the stage (don’t forget to hold down the Shift key to constrain it).


Step 23
Now lets add a few layer styles to spice up the sticker. A Stroke (set to Inside) with a color of #e4e2e1, a Gradient Overlay set to White to Transparent and Radial and a little Drop Shadow for good measure.


Step 24
Add a little text to the sticker with maybe an outline like we used in the Hero text…


Step 25
Maybe add a shadow, reflection and some witty text. And that’s it folks! I hope you learned something useful, or at least were mildly entertained.


Fonte: [Tens de ter uma conta e sessão iniciada para poderes visualizar este link]